Guest blog by The Valu Home Centers Team of Valu Home Center in Elmira, NY
Hydro Dipping, also called Water Image transfer printing, is the process of transferring an image to an object via water.
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies!
- A tote to hold water (size depends on size of object dipping)
- 2X Rust-Oleum Spray Paint and Primer
- Your choice of what to Hydro Dip
- Latex gloves
- Paint stirring stick
Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Step 3 – Now it’s time to spray – Start by spraying in the middle of the water in the center of the tote. Spray for about 10-15 seconds. As you spray, it will form a ring in the water. Have your desired colors ready. Immediately after spraying each of the colors spray the next one, again in the center of the tote of water. After spraying each of the colors at least 2 times, stop. If desired, now you can take the paint stick and lightly pull some of the paint together, giving it a tie-dye look.
Step 4 -Using a glove, take your item to be dipped and slowly dip it into the water. Tip – Look for the best colored area to dip it into. As you dip it into the water, the paint will stick to the item.
Step 5 – After dipping it into the water, it’s IMPORTANT to hold the item underwater until you use a paint stick to push away any remaining spray paint on the top of the water. If not, as you remove it from the water it will stick as you remove it.
Step 6 – Let it dry and you’re done! If desired, after it’s fully dried, you can use a clear coat spray to protect your work of art.
The possibilities are endless what can be Hydro Dipped – Pictured here we dipped light bulbs to use as Christmas Tree ornaments and outside clay pots to have ready for the spring planting season.comments powered by Disqus